|
Welcome to superhonda. First of all their is nothing to building a custom kit, it is a lot cheaper, to custom instead of a kit. First of all you will have to resleeve your block of you put forged pistons in it. I am not sure of your engine type, but most h22's do. First of all i would do the internal work. Because this is your first time I would first buy a manifold and a t3/t4. Its good for 15-20psi. then get that all hooked up including a 2.5 inch exhaust piping. I always make my own manifold, unless the person wants made one. Then get your fuel done, like get hondata. I really rocommed that for 15 psi or to get the max power out of your car, or you can just get a afc, but it will only let you go to 10, with 450. but you will most likely need 550. then just take the car to you exhaust shop and get some intercooler piping made or you can make it your self.
Mod can I post a picture of a nissan I did just to show him?
__________________
Rumble on
|