|
Ok after reading over several posts does this sounds like a probable plan?
1. ACT HDSS (Heavy Duty pressure plate, Organic Street Disc)
2. Clutchmasters lightened aluminum flywheel
3. Water pump
4. Oil pump
5. New main and rod bearings
6. JE 9.5:1compression pistons 84.5mm in size
7. Eagle Rods
8. Golden Eagle iron sleeves
9. After the sleeves bore it out to 84.5mm
10. Have the bores cross hatched and honed
11. Crank magnafluxed
12. Aftermarket head gasket
13. JRSC w/ 9psi Pully
That should be all I need to get this project rolling right?
Thanks,
Dan
__________________
--My Teg
|