Quote:
|
Originally Posted by supapoopa
Kommon_sense, did your suspension even out from side to side with the H&R springs? Are is there still a lean?
|
Almost 2yrs later and still no lean. The car sits level.
Quote:
I have the same problem with my prokits and I'm thinking of replacing them with the H&R sports hoping to fix the lean (about 1 finger difference).
I also currently have AGX shocks which (at least the rear) won't be reusable. When installing, the top nut had to be sprayed with a thread lock compound since the top nut would jam on the thread and the shock rod would spin, preventing the nut to be at a safe distance from the top of the rod.  THey also don't seem to control the ride as well as before so I'm thinking of also upgrading to koni yellows.
WOuld you recommend i go with the H&R cup kit or should i just get the sports with Koni yellow SP3 shocks (22mm shorter rod, and 5 perches).
|
I don't have any experience with the cup kit. I've been very happy with the 5-perch koni yellows. I moved my fronts up one perch, so they are on the 2nd perch from the top.
Quote:
|
I made the mistake of being too conservative the first time buying my suspension ( was thinking of this same setup back when i got the pro kit/ AGX) and now its biting my in the a--... wallet. I figure if i get the SP3 i could just set the front one notch up so the front isn't too low.
|