I've updated FTLRACING (my web site) with JRSC info I've been compiling for the last couple years.
JRSC recommended setup:
http://www.ftlracing.com/tech/honda/JRSC.html
Pulley Configurations:
http://www.ftlracing.com/tech/honda/jrsc_pulley.html
My Setup (2L VTEC ENDYN BLOWER/LHT INTERCOOLED):
http://www.ftlracing.com/members/veris/new_index.html
Calculators I've built can be found here:
D-series (M45):
http://www.ftlracing.com/media/d_series_eaton_calcs.xls
LS (M45):
http://www.ftlracing.com/media/ld_eaton_calcs.xls
SIR (M62):
http://www.ftlracing.com/media/sir_eaton_calcs.xls
GSR (M62):
http://www.ftlracing.com/media/gsr_eaton_calcs.xls
ITR (M62):
http://www.ftlracing.com/media/itr_eaton_calcs.xls
Endyn Blower (My setup):
http://www.ftlracing.com/media/endyn_eaton_calcs.xls
All the calculators are the same spreadsheet, but have the appropriate inputs put in for you. For those that are computer literate the inputs are all adjustable. You can play with displacement changes, pulley changes, rpm, and even blower changes.
I've also include air density adjustment for those not at sea level. If you can't calculate your own air denisty just put in your altitude, it won't be exact, but closer than nothing.
Of particular interest may be the TVS Blower specs I've added. You can change the inputs and see just how well the new TVS blowers perform. For example if you were to take the new R1320 and bolt it up to my setup it should make 370+whp and 20psi (same pullies). Wow! They are suppose to be available in Q3 2007. The question is which version will replace the CCW M62, I'm guessing the R1050, but am hoping for the R1320.
You'll note that I've added a dyno worksheet. It is a VERY rough estimate of what your dyno sheet should look like. It should be within 10-15% of real results, but don't hold me to that... I was just playing and have made a lot of assumptions in it.
Enjoy and Merry Christmas!
Veris
