|
Blank rotors will almost always be stronger then drilled or slotted rotors. They (blanks) have more surface area for the pads to actually grab. drilled rotors in any form are just not worth it IMHO. I don't care how they are made. They tend to crack much eaiser then any of the others listed here.
In etheir case with etheir type of rotor you can't turn them at a brake shop to get the rotors surface clean and fresh again. Also NEVER EVER use slotted or drilled rotors on the rear disks. That's just not safe at all. Because the rear rotors on most hondas are solid and unvented. when a crack forms it goes stright through from one side to the other.
|