|
Need Big Shot Help
I have a 198 HP B18C1 ..tuned on hondata 93 oct. pump gas. I/H/E, HEAD is stock exept for Skunk2 Stage2 cams/springs/retainers, BLOCk is sleeved with forged 84mm 11:1 comp. nitrous pistons & eagle rods. Walboro 255 fuel pump, 440cc RC inj, fuel pressure regulator at 60 psi, I am spraying a direct port 150 shot with all -6AN piping and connectors, Iceman 500 hp solenoids, NOS progressive controller, Hondata is pulling 6 degrees of timing.
I am looking to step up to a 300 shot. I am looking for any advice on what kind of steps I need to take to do this right and SAFELY.
your advice/comments are appreciated
|
