Integra Ride of the Month | February 2004

[mike_sho]

Integra Ride of the Month: Feb 2004

We will be taking around five (5) applicants per months. Everyone who wants to apply can post up various pictures of their cars with different shots of the car (ie no posting 10 side shots). Post up front, side, rear, interior, and engine pictures as well as anything else you can.

Out of all the applicants the moderators will choose the five for the month. On Sunday (February 1st) the votes on the five chosen vehicles will be taken by everyone who wants to vote. On Sunday (February 8th) the winner will be announced.

To apply please include the following.
Vehicle Info: Quick info about your car. Username / Year / Vehicle / Stats & if turbo - super - nitrous - N.A.
Pictures: (described above) anyone who posts up pictures that are not appropriate will be dealt with harshly
Modifications: (Interior, Exterior, Suspension, Engine, Sound/Ice)
Quick Biography of the car: - how it came to be and problems you've had along the way

ANY COMMENTS OR QUESTIONS POSTED IN THIS THREAD WILL BE DELETED! If you guys/girls have comments good or bad DO NOT post them here. This is ONLY for Pictures and the biography! For photo hosting , please use superhonda http://www.superhonda.com/photopost/

If anyone has any questions, comments, or suggestions PLEASE post them in the following thread link NOT IN HERE! Questions, Comments, or suggestions? Post them here.

The prize and the applicants that are chosen will be announced at an unspecified time - sometime before the vote takes place

[slim9300]

Vehicle Info:
slim9300
1995 Integra GS-R Hatch
Red, 5 Spd | Nitrous

Owner: Conlan McConnell

Location: UW, Seattle


Pictures:

















Modifications: (Only the things that matter to me)

Engine/tranny: JDM H22A w/ Quaife LSD, HCP Mount Kit, NOS (75hp) Direct Port Wet Fogger Kit, 450cc Injectors, Exedy Organic Racing Clutch, Greddy EVO 2.75’’ Catback, 3’’ AEM CAI for ITR w/ Bypass Valve, Greddy E-manage, Neuspeed Short Shifter, Trunk mounted Optima Red Top Battery.

Suspension/Stopping: Koni Yellow Struts, H&R Springs, Danny Tran Racing Traction Bars, GS-R Upper Strut Brace, (4) Brembo Drilled and Slotted Rotors, PBR pads, SS Brake Lines, Yokohama ES-100 205/40/17, 17’’ Momo GT2‘s.

Ice/Interior: (4) Pioneer 6.5'' 3-way speakers (200 watt), Panasonic CQ-DF783U deck, Autometer Bezel Gauge Pod, Autometer 2 1/16'' Carbon Fiber Series Electronic Oil Pressure gauge, Autometer 2 1/16'' Carbon Fiber Series Air/Fuel Ratio Gauge, Carbon Fiber Trim Kit, Skunk 2 Shift Knob, ITR Shift Boot, etc.

Quick Bio of the Car: 18 months ago this car was just a shell, no taillights, no engine, no interior, no spoiler, f***ed paint, no rims, etc. In one summer I put my baby together on an 18 year olds budget, basically I worked really hard and had good help. And Just for the record... it's more go then show.

[PM-Performance]

damn too bad its snowing here or id take mine out for some good shots. i have all old pics of it

**edit**

Questions and comments go here:
Integra of the month: Comments & Questions.

This thread is for posting of your ride only.

[IntegraXTR]

Vehicle Info:
IntegraXTR
Alex Yang, Honolulu, HI
2000 Acura Integra GSR, Taffeta White, NA

Pictures:

[IntegraXTR]

(sorry about the dirty pic..i took this when i recieved the car, which was shipped from Indiana at the dock here in Hawaii, as you can see, it's really dirty lol)

*edit* some people PMed me about what the switches were for...one is the radar detector, one is the antenna (which I no longer need since I have my deck to provide that service), and the 3rd was for my brake lights (brake check the tailgaiters behind me lol)..I since disabled that since I could get into trouble with that

*edit X2*

Beaks Lower tie bar installed:

[IntegraXTR]

Modifications:

APEXi GT Header
AEM Cold Air Intake
H&R 1.75" Lowering Springs
4 way adj. KYB AGX
Progress Camber Kit
Autometer Pro Comp Air Fuel
Autometer Pro Comp Oil Pressure
APEXi V-AFC controller
Spoon sports rear strut bar
Type-R Spoiler
Type R front lip (Comptech)
JDM Type R Valve Cover
Mugen sideskirts
B&M Pro Edge Shortshifter
Momo Cobra Shiftknob
Momo Pedals
Sabelt 4 pt. harness
Torasport Carbon Fiber Kit
Alpine 7894 cd deck
Alpine ERE-G190 EQ
3 JL Audio 10w0s mounted in JL spare tire box
PPI 4400.2 amp
MB Quart PSC 216 Separates
JL Mono Block 500/1 amp
JL XR rear coax
Viper 800 ESP alarm
Volk TE-37 rims (205/40/17) with Volk Center caps wrapped in Nitto 555s
Brembo Rotors
Alumapro 5 farad CAP
Avital auto start with 555u and key
GReddy oil and radiator caps
Monster cable amp kit (for JL amp)
Rockford amp kit (for PPI)
Escort 8500 radar with hard wire kit, external warning meter, and custom switch next to e-brake
8 rolls of dynamat extreme (heheheh)
Broadway mirror
Aeromotive FPR w/gauge and Earl's SS lines/fittings
ITR Sway with Beaks Product's reinforcement kit
Benen Front strut tower bar
Benen tow hook
Benen fuel rail
Rays Eng. Lug nuts

To be installed:

Benen rear lower tie bar (engraved, 1 out of 30 made)
Benen front lower tie bar

Quick Bio of the car:

Bought new in 2000. Within a couple of months the mods began to appear starting with the suspension. The only hassle that I have came across was the fitment of the cat back and the apexi gt header. The 1999 GSRs were different from the 2000 GSRs in that the '00 GSRs had a longer cat. I had to get someone to cut and reweld both the header and the cat back piping to get it to work. Everything else was bolt on (more or less).

*edit* oh yeah, and I forgot...I had to purchase a 3rd brake light which I had to custom fab to fit in my hatch. Since I deleted my stock GSR wing, I was missing my 3rd brake light. Something I can help people out if they want to go this route.

[IntegraXTR]

Here's some Model Sharnay (photoshoot) pics:

*edit*

decided this set wasn't necc. :/

here's the link if you guys want to see the gurl!

http://www.eight08.net/2002/teg.html

[dxTYPE-R]

VEHICLE INFO: 1997 red gs-r

OWNER: edgar mejia

LOCATION: sacramento cali

MODS: ha what mods...act street clutch, air filter, ground control coilovers, rear upper strut bar, short shifter. stock front strut bar.
i have half a type-r front end that im gonna put on someday...need passenger light,hood,n bumper.

BIO OF CAR: i also own a 91 hatch si but i blew the motor so i was in desperate need of a new car not just for my own pleasure but also because i was an expectant father...and what better family car to get then a gs-r!?..lol...so i had my super nice dad help me get a loan and from there the little, little mods began. Ive had my car for a year now. The only problem i had with my car was lowering it for the first time. My car was from Ohio and i guess the snow n salt n what not rusted some bolts....so the problem i ran into ended up having my car on jack stands for about a month.

[fastfu]

heres mine

its a '93 gen 3 jdm si vtec.

it has a mugen front lip and mugen sides
type R rear spoiler.







engine :
apexi vafc,
skunk2 inlet manifold,
type R throttle body,
AEM cai, (heat wrapped)
mugen header,(heat wrapped)
decat,
mugen cat back,



suspension :
eibach pro kit and koni sport yellows,
type R rear sway bar.

[IntegraXTR]

figured i'd add more pics..

here you guys go..

[IntegraXTR]

[IntegraXTR]

[IntegraXTR]

just installed today