I'm new to the world of honda aftermarket parts. I am replacing the rear bumper cover on a 2003 accord ( old one damaged by a new driver with no damage to the car underneath). The cover I have is made by YCC, made in Tiawan. I replaced the front cover a year ago with one from the same company without any problems.
I tried to put it on and it is too small. When it is centered the bolt holes are partially covered by the cover; covered enough that I am not able to thread the bolts in. If I put on one side then it is 5/16ths short on the other side.
I am going to return it and try a different brand that is available from the same shop. I am posting here first in the event someone has insight or tricks to offer that might help.
thanks
s
I tried to put it on and it is too small. When it is centered the bolt holes are partially covered by the cover; covered enough that I am not able to thread the bolts in. If I put on one side then it is 5/16ths short on the other side.
I am going to return it and try a different brand that is available from the same shop. I am posting here first in the event someone has insight or tricks to offer that might help.
thanks
s