|
Alignment question
Ok guys, I FINALLY got my alignment done after I installed my koni's and h&r sport springs. But I got a question because I'm afraid they didn't do it right. They gave me the printed up sheet that gives caster, camber and toe specs from min to max. So I figure by using common sense, MY settings have to be BETWEEN these specs right? Well my front wheels seem to be fine. But my rear seems to be WAY off now. For example, my toe setting should be in between 1/32" - 3/32". Well before the left was -3/32" and now after they aligned it, it says it is 1/8". Well if you convert that it wil be 4/32 which means it is 1/32" above the max. Now my right rear it was -1/32" and now it is 5/32". That's 2/32 ABOVE max. Wouldn't this be considered bad alignment? I always thought that going in between was the best. Oh wait and my front. Well the toe is suposed to be between -1/32" - 1/32". The left front was -1/16" and they brought it back up to 0". The right front was -5/32" and now up to -1/32", which I'm guessing is fine? Help me out here guys, I don't want this to be something bad. Thanks.
99AznAccord
|
Linear Mode
