b20 cam

[red88352]

I got a b20 with a b16 head n my hatch my question is i got a si cam and wana get a better cam any sugestions?

[2highpsi]

if your not looking to speed alot of money ie valves, valve springs etc etc
you could get the itr or ctr pistons

[weewoo]

see which cams for what engine have higher lift and duration than your stock ones.
whether it be itrs or ctrs
thats if you want to extract a small amount of performance without going deeply into valvetrain work and what not.

[2highpsi]

either ctr or itr would work well if your not wanting to replace your hole valvetrain.
the ctr just a tad bit bigger lift on the intake if im not mistaken also

[weewoo]

if im not mistaken i think its ctr intake itr exhaust???

[red88352]

Well the guy i got the car from had a bigger cam but he said it road and idle crappy so he put an si can n it to mellow it dwn. i was looking at a skunk 2 stage 2 cam? what u thnk

[weewoo]

those are the ones im looking into.
skunk2 suggests to upgrade the valvetrain for those cams because of the longer lift and duration.
so if you feel like spending an extra couple of hundred dollars to upgrade your valvetrain along with your s2s2 cams then go for it.
but you should get a decent tune with them.
you will be surprised at the difference in performance if you get the proper tune

[8urcivic]

Originally Posted by weewoo

if im not mistaken i think its ctr intake itr exhaust???

yes....but your gonna spend about 350-500 on that setup..



you can upgrade to gsr cams.....they are a little more aggressive than stock si cams.


you can get a set of these locally for like 50 bucks.