Do you believe this H22 should I buy it?

[sci-fi-civic]

Prelude H22A 92-96 - Engine Swap Package into 92-95 Civic, 94-95 Integra

Specifications
DOHC VTEC 4 Cyl. 16 Val.
• Year: 92-96
• HP: 200hp@8000
• Torque: 161 lb-ft@5500
• Redline: 7200 rpm
• Diplacement: 2157cc
• Compression Ratio: 10.6:1
• Transmission Type: Hydraulic

List Of Parts Included
• Complete Motor
- Block
- Intake Manifold
- Complete Head
- Sensors
- Exhaust Manifold
- Fuel Rail
- Injectors
- Distributor
- Throttle Body
- Alternator
- Starter
- Ignition Wires
- Headers

• OBD1 ECU (Computer)

• 5-Speed FWD Hydraulic Transmission
- With Clutch components assembled to the engine

• Intermediate shaft

• Motor Mount Kit YONAKA MOTORSPORTS - EG Civic 92-95, DC2 Integra 94-01, H-Series Mounts (YMMM002).


• New drive shafts(pair) YONAKA MOTORSPORTS - 94-01 Acura Integra Axles - GSR (2 Axles)

• Used shift linkage(from 92-96 prelude)


Warranty

60 day warranty on the engine block and head(internals). Each engine is compression tested and results are provided with each engine. We only ship engines with positive compression results.

Price: $2799.00


I talked to this comany on the phone they said this is everything for a complete drop in... Does anyone know if the drive shafts will fit my civic properly? I have a 93 ex. Also does anyone know anything about the engine mounts? He also said all I will have to do is wire the ***** but the ecu will work properly.... Does anyone know if there is anything else I will have to do besides cut the hole for the shifter cables and trim the tranny mount? and replace stuff on the engine that I need to like plugs wires etc? If ANYONE can help me I'd greatly appreciate it!

[plusOnE]

Looks like you would have everything to drop it in however there are a couple of things that I would check on if I were you.....

Wiring Procedures for this swap....SEARCH the forums

I would check on the driveshafts to make sure that that they'll fit the splines on the front hub assembly because the outer joint assembly on a civic is different that than of a prelude or Accord


Looks like you're missing another key ingredient for the swap which would be the shifter from either a Prelude or an Accord, the one you have in your civic won't work.

I'm not trying to seem like an ass or anything but keep in mind there's a difference between having all the parts necessary to drop something in and all the info and parts necessary to install something and make it run properly

[sci-fi-civic]

Where can I get the right drive shafts then? No it's cool you are not being an ass. I knew about the shifter I just forgot to include it... I'd rather have everything i need so I can do it over the weekend kinda deal and not be screwed...

[plusOnE]

It's possible that those could be the right ones I think that a Civic has 32 splines on the hub and YONAKA may make the shafts so that the outboard shafts have 32 splines....just call the company and check with them....

I've never done an H into a Civic before but I think jthe other things you're gonna want to check on are the wiring harness cause the h22's won't connect to the civic's tower connectors if I recall correctly and you'll aslo need an Injector Resitance Box I think

I know that the package deal may sound good but I would also check OSAKA JAPANESE ENGINES and price like a hasport kit or something in addition to the other componets....Just play with figures and don't feel compelled to get the package cause it sounds like a sweet deal I know OSAKA will give you the MOTOR TRANS AND ECU of the same H22 for $1750.00 (U.S.) just check it out.

[road.head]

do you believe?

[gurusan]

Which company is this?

I would rather go with hmotorsonline and order the mounts, axles, and linkage seperately.

oh....and yes I believe the h22.

[sci-fi-civic]

Originally Posted by road.head

do you believe?

do I believe what?

[road.head]

Originally Posted by sci-fi-civic

do I believe what?

you tell me

[sci-fi-civic]

Originally Posted by gurusan

Which company is this?

I would rather go with hmotorsonline and order the mounts, axles, and linkage seperately.

oh....and yes I believe the h22.

I was looking at getting it from here....
www.jspecautosports.com

I can get the linkage for like 80 some people were saying....

[gurusan]

I recommend hmotorsonline. THey have an excellent reputation for selling strong motors in good condition for a good price.

And where can you get a linkage for 80? That's a pretty damn good price. Normally they sell for 120-150

[plusOnE]

Hasport Mounts : $599.00

Rear Engine Bracket : $75.00 (might be extra, your swap may come with this

Hmotorsonline Complete H22 Changeover $2199.00+Shipping

You'll still need some wiring parts and the driveshafts but all the parts listed above are quality So you can't go wrong....

[gurusan]

Originally Posted by plusOnE

Hasport Mounts : $599.00

Rear Engine Bracket : $75.00 (might be extra, your swap may come with this

Hmotorsonline Complete H22 Changeover $2199.00+Shipping

You'll still need some wiring parts and the driveshafts but all the parts listed above are quality So you can't go wrong....

Yup go with this man...but go here for mounts... much cheaper

Hasport is great...but there are much less expensive mounts to be had that perform just as well if not better...I suggest innovative...otherwise any of those ebay companies will be fine.

60-75a polyurethane rating will be bearable...anything over that and don't expect to keep your teeth in your skull very long...in other words...vibratron

[sci-fi-civic]

the last real question that came to mind is will the power steering work in my 93 civic? If it doesn't do I have to switch out the rack too? If it does work do I have to get a new bracket or is there enough room to run it how it is?

Thanks!

[sci-fi-civic]

I think I'm actually going to go with this one...

H22A 92-95 Complete Change Over

Price: $ 2199.00 Plus shipping and handling.
Availability: In stock and ready to go.



- Motor
- Hydraulic Tranny
- ECU (P13)
- Axles with Half Shaft
- Shifter Cables
- Shifter Assembly
- Stock Motor Mounts *
- Alternator
- Starter
- Clutch
- Flywheel
- Intake Manifold
- Exhaust Manifold
- Fuel Rail
- Injectors
- Distributor
- Engine Harness
- Comes With All Sensors Needed
- LSD Tranny (Optional +$300)

Motors average 35,000 miles and come with a 100% start up warranty. All Sensors are guaranteed not broken and in working condition!

* If you need a motor mount kit for your 1992-2000 civic, we can supply you with the hasport kit for $450. Prices valid with purchase of a complete changeover only. Also available is the correct axles for swapping this motor into a civic. 90-93 Integra axles and 90-93 Accord Intermediate shaft can be included for an additional $200 (please note that stock H22 axles will not be included if you opt for the civic axle combo).

Also available for the axles are the Hasport High Horsepower axles, which work with a 92-96 prelude intermediate shaft for $350


it came from hmotorsonine.com. I'm getting the complete deal 3,000 out the door. (plus shipping)

[plusOnE]

I believe Hasport's mount kit is compatible with power steering...not sure though just go to their website call or check them out........