dohc vtec b16 head on b18b block???

[sil2000]

hey ive got a 2000 integra b18b motor, and i want THE VTEC, and i have a b16 vtec head...can it be done? and if so will the stock block handle it or will i need to change more than just the head..i have the ecu as well...please help me!!!!

[holloway]

Yes it can be done but you have to run oil line to the head for the v-tec to work, as well as get the dowel pin kit off ebay. Go to ebay they sell the whole kit oil line, head gasket etc. You have to run you V-tec wire's as well. there is a write up on this conversion some place on here as well.

[kommon_sense]

Yes, it can be done. Look up information for ls/vtec . Keep in mind that even though you are adding vtec, you are still limited to the stock redline because you still have an ls bottom end (unless you rebuild it).

[sil2000]

thanks guys for your information, that really helped me!

[brandizzle614]

Originally Posted by sil2000

hey ive got a 2000 integra b18b motor, and i want THE VTEC, and i have a b16 vtec head...can it be done? and if so will the stock block handle it or will i need to change more than just the head..i have the ecu as well...please help me!!!!

Of course it can done people do it all the time. umm try to find the golden eagle ls/ vtec kit its great the dowel pins fit right in they give u the right taps to tap the oil port and also included the external feed lines.