Well I have a CRX HF with a first genb16 swap.
I took it to the track and it ran the 1/8th in 10.1 at 69mph
The track is really shitty its slick as fuck but that still sounds slow.
Can you give me any advise I don’t know any thing about cars?
Here are the mod’s that I have done.
Skunk2 intake manifold and 68mm throttle body
1 peace header 2 ½ in and 2 ½ straight pipe all the way back
AEM fuel rail and cold air intake
MSD sport compact ignitions system
7 ½ fly well puck 3 clutch
15x 6 ½in lightweight wells
I have a suspension kit on it shocks and the whole thing
Commander Hippy Killer of the 69th Swamp Cricket Regiment.
Oversteer is when you hit the wall with the back of the car. Understeer is when you hit the wall with the front of the car. Horsepower is how fast you're going when you hit the wall, and torque is how far you drag the wall with you.
Quote:
Originally Posted by Immortal Technique
honest people die for their country and they religion
while the most currupt walk a-straight the world that we live in
Bigger, Badder, and Better
Than all of your Gold And Cheddar
Commander Hippy Killer of the 69th Swamp Cricket Regiment.
Oversteer is when you hit the wall with the back of the car. Understeer is when you hit the wall with the front of the car. Horsepower is how fast you're going when you hit the wall, and torque is how far you drag the wall with you.
Quote:
Originally Posted by Immortal Technique
honest people die for their country and they religion
while the most currupt walk a-straight the world that we live in
Bigger, Badder, and Better
Than all of your Gold And Cheddar
Ok thinks for your help but what I am looking for is an answer to my questions like.
1. Is 10 second 1/8 normal for a CRX with the mods I have on it?
2. Does it make since that a bone stock CRX SI was running the same times as me?
I have some driver mods to B&M short shifter and hasport shift linkage
1. No
2. Yes. Driver mod = you learning how to drive the car
Post your timeslip or let us know what your 60' times were. Most likely your launch was bad and that cost you so much time. Money can't always buy speed.
You should have been running at LEAST a 9.8 or better. A b16 swap in a crx with i/h/e would do 9.8 on street tires. Try some drag radials and practice lauching from the tree, my bet is driver error had alot to do with the low times.
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.