USDM 4th gen prelude 4ws writeup. - Honda Forum / Acura Forum

sean1121 · 10-13-2006, 11:12 AM

4 wheel steering. (4WS)
4ws Writeup - Kevin (sean1121) Oct. 13th 2006

Update: I've moved this writeup to the NTPOG forums, (link below) any and all updates will be made there. If anyone has any questions for me its best to post on the NTPOG forums as I don't visit superhonda all that much.

USDM 4g 4ws Writeup - NTPOG Forums

Freakin'H22A · 10-13-2006, 12:03 PM

Great info... it seems that you have put much effort into making your swap as well as making a DIY... props man...

I don't use 4WS but I'm sure if I was I'd find this interesting. :clap

sean1121 · 10-13-2006, 12:13 PM

Quote:

Originally Posted by Freakin'H22A

I don't use 4WS but I'm sure if I was I'd find this interesting. :clap

Thanks, that's why I did this. There's to much false info out there about 4ws.

[Buffalo] · 10-13-2006, 12:22 PM

someone sticky this please
___________________________

i have code 20. Do i need to replace the main steering angle sensor only or the front sub steering angle sensor and the front main steering angle sensor too?
where are those sensors located?? any pics?

sean1121 · 10-13-2006, 02:33 PM

Quote:

Originally Posted by [Buffalo]

i have code 20. Do i need to replace the main steering angle sensor only or the front sub steering angle sensor and the front main steering angle sensor too?
where are those sensors located?? any pics?

You'll want to do the troubleshooting in the manual. The diag flow chart for a code 20 is on page 701 of the pdf. (page 17-55 in the manual)

The "affected" list in the error code list is the parts that are involved with the problem that caused the code. Its not saying that they're bad or need to be replaced, just that they are involved with the problem. Only by going through the diag flow chart will you know if you need to replace the part or if its something small like a bad connection.

[Buffalo] · 10-13-2006, 03:08 PM

Quote:

Originally Posted by sean1121

You'll want to do the troubleshooting in the manual. The diag flow chart for a code 20 is on page 701 of the pdf. (page 17-55 in the manual)

The "affected" list in the error code list is the parts that are involved with the problem that caused the code. Its not saying that they're bad or need to be replaced, just that they are involved with the problem. Only by going through the diag flow chart will you know if you need to replace the part or if its something small like a bad connection.

thank you A LOT man

sean1121 · 10-13-2006, 03:16 PM

Quote:

Originally Posted by [Buffalo]

thank you A LOT man

No problem.

bboixtc · 04-10-2007, 10:03 AM

which pins go out to the cluster to indicate an error? I am doing a EL cluster conversion on my 92, and do not have the 94+ dash harness. I am splicing the wires. Therefore, I'm assuming there are wires that go into the cluster to indicate a 4ws error. Do any of you know which ones they are?

H23lude92 · 04-10-2007, 10:09 AM

damn! very nice write up man!! i dont have 4ws but i learned allot from this, thanks.

bboixtc · 04-10-2007, 11:32 AM

hmm. do you know which pin it goes into on the cluster?

sean1121 · 04-10-2007, 01:57 PM

Quote:

Originally Posted by bboixtc

hmm. do you know which pin it goes into on the cluster?

No but its labeled B9 on the diagram.

RoflcopterDOWN · 04-10-2007, 03:11 PM

cool thread..but i have a few questions...

1. what years did they make 4WS preludes?

2. What is the chassis code for a 4WS prelude?

hopefully someone can answer these.. thanks..

Rick V · 04-10-2007, 10:35 PM

faq'd

G2IntegraGS-R · 04-10-2007, 11:08 PM

Good stuff, even tho I dont have a 4WS.

sean1121 · 06-04-2007, 05:23 PM

UPDATE - Link to 4g 2ws -> 4ws conversion thread
http://preludeonline.com/showthread.php?t=210796