I'm looking for an acura integra Ait sensor that goes in the 3rd runner of the IM, i'm looking for one that doesn't work, as i'm gonna be using it to fill the void in my ITR IM, and won't be plugged in, if you have one laying around and would like to help out a fellow SHO member, please let me know, i can get a coulpe bucks for shipping, also the 2 screws would be nice if you had them laying around too. thanks though! PM please, thanks!
__________________
N/A is Best
Honda= <3
Going fast in corners is funner than going straight
Mods: built 2000 Integra Type R engine and tranny. Head is ported and polished, Crower rods, JE pistons Skunk2 stage 2 cams, REV Valves springs and retainers, skunk2 intake manifold, Act flywheel, RPS six puck sprung hub clutch, AEM cam gears, AEM fuel rail, STR cam seal, AEM V2 cold air intake, throttle body spacer, JDM ITR headers, APC catback exhaust
Quote:
Originally Posted by VwtoHonda
I'm looking for an acura integra Ait sensor that goes in the 3rd runner of the IM, i'm looking for one that doesn't work, as i'm gonna be using it to fill the void in my ITR IM, and won't be plugged in, if you have one laying around and would like to help out a fellow SHO member, please let me know, i can get a coulpe bucks for shipping, also the 2 screws would be nice if you had them laying around too. thanks though! PM please, thanks!
Why don't u just do what I did and get a block off plate made. When I had my JDM type r manifold on my old engine I just got one of my buddies to weld a plate over it.
__________________
Dam, did I just beat u in my Honda? Sure did, now your girl wants to get at me (True Story) "I built it, I drive it, your opinion doesnt matter. It doesn't have to be JDM it just has to be functional." http://www.texas-imports.com/forums/...referrerid=346
Mods: built 2000 Integra Type R engine and tranny. Head is ported and polished, Crower rods, JE pistons Skunk2 stage 2 cams, REV Valves springs and retainers, skunk2 intake manifold, Act flywheel, RPS six puck sprung hub clutch, AEM cam gears, AEM fuel rail, STR cam seal, AEM V2 cold air intake, throttle body spacer, JDM ITR headers, APC catback exhaust
Sorry for double posting, but if u don't want to go that route I have one on my skunk 2 im that I'm using right now but it's just blocking the hole cause in the Si's that sensor goes on the intake, so if I can get my buddy to close of my skunk when I go get my doors shaved u can have that one unless u really need it right now in which case I can't help u
__________________
Dam, did I just beat u in my Honda? Sure did, now your girl wants to get at me (True Story) "I built it, I drive it, your opinion doesnt matter. It doesn't have to be JDM it just has to be functional." http://www.texas-imports.com/forums/...referrerid=346
Mods: built 2000 Integra Type R engine and tranny. Head is ported and polished, Crower rods, JE pistons Skunk2 stage 2 cams, REV Valves springs and retainers, skunk2 intake manifold, Act flywheel, RPS six puck sprung hub clutch, AEM cam gears, AEM fuel rail, STR cam seal, AEM V2 cold air intake, throttle body spacer, JDM ITR headers, APC catback exhaust
Quote:
Originally Posted by VwtoHonda
k, just let me know??
I might be able to help u out sooner I just remembere I got a friend whose garage is like a storage place for honda/acura parts any time we need something we stop by him first and see if he has it. I'll get at him tomorrow and then let u know cause I won't be blocking off my manifold probably till January
__________________
Dam, did I just beat u in my Honda? Sure did, now your girl wants to get at me (True Story) "I built it, I drive it, your opinion doesnt matter. It doesn't have to be JDM it just has to be functional." http://www.texas-imports.com/forums/...referrerid=346
Mods: built 2000 Integra Type R engine and tranny. Head is ported and polished, Crower rods, JE pistons Skunk2 stage 2 cams, REV Valves springs and retainers, skunk2 intake manifold, Act flywheel, RPS six puck sprung hub clutch, AEM cam gears, AEM fuel rail, STR cam seal, AEM V2 cold air intake, throttle body spacer, JDM ITR headers, APC catback exhaust
Sorry, no dice kid he didn't have one and like I said I won't be taking mine off till the beginning of next year
__________________
Dam, did I just beat u in my Honda? Sure did, now your girl wants to get at me (True Story) "I built it, I drive it, your opinion doesnt matter. It doesn't have to be JDM it just has to be functional." http://www.texas-imports.com/forums/...referrerid=346
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Linear Mode
