Can i change my front driver side fender (panel over the tire) on my own??? It was damaged, so i ordered the part, painted it, and im thinking i can save a buck or two if i install it myself.
Mods: SR20DET,3" exhaust from the turbo, AFC, Greddy RS B.O.V., CP pistons, greddy head gasket, nismo clutch, tie rods, springs, shocks, vlsd,etc
it's pretty straight forward. start by taking out the wheel well liner. then just uncrew all the bolts and pull it off. can't remember if you have to take the front bumper off or not. but just just unbolt from the front bumper underneath the car, in the engine bay and in the door jam
He's not Japanese, he was referring to the languages he can speak. He's capable of speaking English, can probably curse and ask for a beer in Spanish and has heard his girl moan in Japanese in bed
He's not Japanese, he was referring to the languages he can speak. He's capable of speaking English, can probably curse and ask for a beer in Spanish and has heard his girl moan in Japanese in bed
This is an older thread but on an RSX you have to remove the side skirt and front bumper.
There are several clips in the wheel well. 2 screws in the engine bay, 1 screw behind the side skirt, 1 screw behind the door by the a-pillar, and lastly one by the headlight behind the bumper cover.
__________________
2002 Acura RSX Type-S Arctic Blue Pearl
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Changing your own fender...?
Linear Mode
