Integra FS/WTB Thread

[grammerboy562]

Originally Posted by ronniec

i got a set of usdm itr front seats for sale $650 or trade for black or red jdm recaros with me putting some cash on top
NO rips, burns[non smoking car], gashes, slices[not a ninja], cuts, tears, creases, bolster wear

does it comes with the complete seats front and back witht he tail lights if so im interested! my aim is swamonkeyme and email is 1-time@myway.com/ get at me there i dont go on here much! thanks!



grammerboy

[viet_83]

I ran out of cash and had no choice but to sell some of my gs-r parts. I'll post my bottom dollar for the following items (all in good condition):

Rocket motorsports M22x cams (brand new): $550.00

STR 5-bolts camgears (brand new): $125.00

OEM JDM ITR pistons with wrist pins and rings (brand new): $200.00

Blox Intake Manifold w/ Hondata IM Gasket, ITR throttle body cable, ITR throttle body cable bracket, 92-95 Civic throttlebody pulley (brand new except the pulley): $250.00

1997 Prelude H22A4 290cc injectors (been clean and mapped): $150.00

Virgin P28 ECU w/ Boomerang OBD2 to OBD1 conversion harness wires and moates chipping kit (brand new except the p28 ecu): $170.00

You pay for shipping cost and paypal fee



e-mail: viet_le83@hotmail.com
I always check e-mail.

[Mr GSR]

I still have my stuff laying around....
Tanabe Racing Medallion Catback
DC Passenger Seat, grey interior scheme
Greddy FAT timer with plug-play harnedd for a DC Integra
Test pipe (I think I have 2)

[m_kluch]

Asking price is $240. One of them (right side) was damaged on one of the corners because of an accident but a shop bondo'd/glued the corner back into shape and it came out very nice. Also where one of the metal brackets is connected to the valence on the underside, was cracked so the shop used some epoxy type stuff to glue/strengthen it. Then the valance was repainted by the shop. The other valance is in very good condition with no damages. Both don't need to be repainted but might want to repaint the one that was damaged because there are some scratches showing through/under the paint on the bottom part of the valence and a couple other imperfections in the paint which are hard to see when they are mounted anyways (can't see unless you look under the bumper or get eye level with the bottom of the lip). I test fitted them and they both fit very nicely. They both come with OEM weather stripping and are painted OEM super sonic blue pearl (b90p). (Bought already painted from Acura dealer, damaged side was repainted by shop).

here are the pics




here is a comparison to show how well the shop redid that corner






here is the corner on the inside


the part where this metal bracket is was cracked so they strengthened it too


here is the tab from the outside


here is a pic to show that you cant see the imperfections on the bottom of the lip when mounted on the car


OEM weather stipping

[tegman33]

B16 cams and cam gears
B16 wiring harness obd1
GSR valve cover
ARP bronze valve guides

im forgetting alot of parts...will update later

all parts are OBO..thanks Ryan

[agula001]

buyer pays shipping and add 3% for paypal. offers are welcome

-DOOR PANELS W/ TWEETERS AND SWITCHES
-OEM FLOOR MATS
-DASH HOUSING
-CLIMATE CONTROL BEZEL/ AND CLIMATE CONTROL (can be parted or sold together)
-CIG/ASHTRAY
-LS CLUSTER (cluster itself is from a 00 itr, guages are from ls)-CUPHOLDER
-CF EBRAKE HANDLE
-REAR SEATS
-CHAMP WHITE AZECT/ACE SIDESKIRTS

[-b18c1vic-]

read the sig

[CapnToll]

I'd like to get rid of my AEM Short Ram Intake w/ K&N Filter. I have a nice Comptech Icebox now, so I don't have the need for this AEM SRI. Specifically fits B18B Tegs, I'm sure it will fit many other applications.

This intake has never seen winter and looks almost new. The filter looks great too; has been properly maintained. Comes with a mounting bushing if you're installing it on an LS Teg.

I'd like to get $100 for it, but am open to offers.
(I'm thinking $59.99 is a great price for an AEM arm, and $39.99 is great for a pretty much new K&N filter).

[sherman.b20.teg]

im located in urbana ohio, near springfield
custom 1991 Acura Integra, hatchback
engine swap, a B20B4 V-Tec, and it has roughly 33k miles on it

-electric yellow paint
-custom leather interior w/embroidered Acura emblem
-custom interior panels
-mild body kit
-17in maxxium rims w/brand new drilled and slotted rotors, not even 5 miles on them, just put them on
-carbon fiber hood w/hood latches
-M5 carbon fiber racing mirrors
-brand new halo headlights and carbon fiber tail lights
-DC race header
-oversized racing cams
-AEM air intake
-carbon fiber strut bars
-numerous carbon fiber exterior accents
-sunroof/moon roof
-tilt steering wheel
-power windows
-power locks
-custom alarm system
-V AFC A'PEXi V-Tec timing computer, also has tach, rpms, throttle, etc.
-MOMO steering wheel, race petals, and race knob
-Ractive shift boot and E-brake boot
-Dual XDMR7700 head unit
-Kenwood equalizer
-700x5 Kicker amp
-10inch L7 solo-baric subwoofer
-Autogag racing tack
-sports-comp oil and water A-pillar gauges
-Varad yellow under glow
-custom interior neons and strobe lights
-carbon fiber accents everywhere in the interior of the car

**I’m sure there are plenty of things I’ve left out or forgotten

this beauty has been pampered with tons of hand washes and waxes, it’s always clean with a gorgeous finish, the previous owner garaged it for 6 years before I got a hold of it and put easily a few thousand in it.
It has a few chips in it and other minor imperfections, nothing major, but other than that it’s in good shape.
it doesn’t have cruise control or fog lights, when was being built by original owner it wasn’t put back together correctly, and the ac and heat don’t work, only because they couldn’t fit it in along with the new engine because of its size
*tons of pure horse power and is quite quick and very fast
*great gas mileage, very great for the high pries
$10,000 or best offer
I have plenty of pictures, email d-unit_sherman@hotmail.com or call my cell (937)926-0700

[Integra_D16A1]

Originally Posted by honintegra

90 g2 turbo teg 4dr
new interior
b18b1
turbonetics complete kit
17" enkei on brand new fuzion tires
new brakes and rotors
lowered 3 inches
alpine and memphis audio
also have b20 block and crank that i removed from car in good shape

how much would u sell the b20 block for?

[team_image1]

i need 98 black leather seats.

[d16y8 civic]

Wtb a 98-01 Integra GSR. 2 door. Under 90k miles. Mostly stock (completely stock preferred). Must be either white, ssbp, silver, or black. No purple or green. Near Atlanta, Ga. Must be very well kept. Pm me if you have something i may be interested in.

[acb16a2si]

I was going throught the shed and got some parts i have no use for pm or email if interested email= burnqauist3162002@yahoo.com
here we go
ls trans and si trans well seel for right price if not ill keep them si trans is rebuilt has 500 miles on it.
ls head with intake manifold will sell seperate
ls injectors
b16a injectors
b16a crank
ls stock intake box with piping
b16a block
a/c compressors with some lines
power streering pumps
rear mount brackets
oil pan with pick up
starters
alternators
90 da interior pieces door panels center pieces etc..
make offers thanks trevor

[adammassey]

i would like to buy them i need to know if they fit a 90 teg

[jlui83]

WTB: Fat Five Rims/Tires Excellent condition
Location: VA/DC/MD

Email me
JLui83@gmail.com