i have a 95 gsr 4dr that got rear ended well eveything is still good, but i got a 98 gsr 4dr shell that i wanna transfer everything onto, but im a little unsure about the rear brakes, is there a thread i can go to to get more info on swapping the brakes onto the 98 shell? or even other info about swapping things over would be greatly appreciated...thanks guys...
Mods: tenzo Cold air intake, 2 1/2 inch OBX type X exhaust, 1.5 eibach dropped springs, KYB adjustable shocks, 16" low pro wheels, 205/45zr16, angel eye projector headlights, euro tails and corners, b18c swap converted to 5 speed
Quote:
Originally Posted by ammoxi
i have a 95 gsr 4dr that got rear ended well eveything is still good, but i got a 98 gsr 4dr shell that i wanna transfer everything onto, but im a little unsure about the rear brakes, is there a thread i can go to to get more info on swapping the brakes onto the 98 shell? or even other info about swapping things over would be greatly appreciated...thanks guys...
what are you unsure about the brakes?
__________________
Never take a laxative and sleeping pill on the same night...
i wanted to see if i could see like a diagram on how the brake lines go about in the rear, cause the one that were on there are gone now, thats why...that would help alot...thanks..
It's pretty easy. If you have tools, it can be done in a few hours or less. The whole rear assembly comes apart with just a few bolts and some lines to take off. Once you get it all swapped, have your buddy help you bleed the brakes. Everything will bolt right up because they are essentially the same car. Good luck.
__________________
Quote:
Originally Posted by 9400rpms
you rev a completely stock b20 to 8400rpms??....your running on pure luck.
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Linear Mode
