WINDOWS ROLL DOWN ULTRA SLOW...PLEASE HELP!

[teamshotokan]

i have a 95 dc2 and my windows roll down ultra slow. can anyone tell me what is wrong and how i can fix it? i think i need new window motors but my boy says i need to grease up the metal part inside the door where the window sits on. i dont believe that at all. but if he is right can someone let me know...thanks

[95integrars]

low battery?

[teamshotokan]

no. thats what i thought too but my battery is brand new.

[95BXGS-R]

The rubber stripping inside the door probably fell off the metal track. There's an article over on TeamIntegra.net on how to fix this. look through the articles and don't bother asking how to do it cause Justin Klemfuck will probably delete you.

[teamshotokan]

ok thanks. i will be sure to check that out.

[RoadRageMotors]

when was the last time you cleaned and lubed everything, im betting you havent and onone else has on the car either, just clean and relube it. that will mostlikely fix it if the coms on the window motors are no already burnt up from being over worked.

[bobbinika]

Originally Posted by 95BXGS-R

The rubber stripping inside the door probably fell off the metal track. There's an article over on TeamIntegra.net on how to fix this. look through the articles and don't bother asking how to do it cause Justin Klemfuck will probably delete you.

hahah Justin Klemfuck
thats funny

[teamshotokan]

yeah i havent cleaned or lubed it up and i dont think anyone else has neither.

[RoadRageMotors]

try that first, the problem happens alot with other cars too and normaly it just dirty

good luck

[viet_83]

did u read the article?? on TI-net?

Beside we had an thread about this like last year where you can lubricate the tracks and molds. It will allow the windows to move up and down faster since the window motor is not a plm. However, the process from the article is a better way.

[teamshotokan]

no i havent read it yet. i looked for it and i cant find it. i looked in the DIY section and i didnt see it. maybe i overlooked it or maybe im looking in the wrong spot. could you tell me where it is?

[viet_83]

http://www.t e a m-integra.net/sections/articles/showArticle.asp?ArticleID=596

[Brad98_teg]

My problem is that my window shakes when its going back up. Could this be from not being lubed?

[viet_83]

Originally Posted by Brad98_teg

My problem is that my window shakes when its going back up. Could this be from not being lubed?

they also have another article for this plm too.

http://www.t e a m-integra.net/sections/articles/showArticle.asp?ArticleID=552

[teamshotokan]

should this same lubrication work on the tracks for my sun roof?