Wrecked Integ

[HaVoCsDc2]

Yeah a little embarressing but I guess it happens...I was burning out in my 94 Integra LS and ran into a planter with my front right wheel, the wheel is bet and the wheel got pushed back only an inch and a half away from the back of the fender...any thoughts on what parts could fix this?

I've been told that the lower control arm could be just bent and to get new ones and get it aligned, so if your thoughts or knowledge could help me in anyway I would appreciate it.

[soldiermanny]

Originally Posted by HaVoCsDc2

Yeah a little embarressing but I guess it happens...I was burning out in my 94 Integra LS and ran into a planter with my front right wheel, the wheel is bet and the wheel got pushed back only an inch and a half away from the back of the fender...any thoughts on what parts could fix this?

I've been told that the lower control arm could be just bent and to get new ones and get it aligned, so if your thoughts or knowledge could help me in anyway I would appreciate it.

man with out seeing the actual car itself, its pretty much a guessing game. alot of things can be f-d up. the chassis could need some pulling, the whole suspension on that side could need to be replaced, cv joints? idk? got any pics?

[HaVoCsDc2]

I'll get some pics up here tomorrow around this time to give you a better picture, but it doesnt look like anything else is messed up, just the lower control arm is bent, everything else looks the same, but the best way to describe it is the normal gap on the otherside between the fender is 3" & 3" but on that wheel its 4.5" and 1.5"