dynoing with my tranny

[95hprelude]

since i have the f22 tranny with an h22, would it be fair if i took the average of a pull in 3rd and 4th gear? the average of the 2 gear ratios are 1.059 (3rd is 1.185 and 4th is 0.933). thats a lot closer to 1:1 than the 3rd and 4th gear

[ATISTANG]

not sure what the hell you said up there.
But the 4th gear is still the closest to the 1:1 by the numbers you put up there. You are only cheating yourself if you do 3rd gear pulls, and then I will have to call you a ricer

[hobie237]

Do a first gear pull and see how much real POWER you're putting down...

just kidding.

Use 4th.

[95hprelude]

na the reason why i ask is because the 4th gear in my tranny is actually lower than 1:1, so i guess that would mean that my dyno would come out lower than other h22 dynos. if i avg my 2 runs, i would get 172whp, which is around what other untuned h22's get with bolt-ons.

3rd gear (1.185) pull - 178whp
4th gear (0.933) pull - 167whp

Avg gear ratio - 1.059
Avg whp for the 2 gears - 172

do u get what i'm saying now? im not saying im only going to dyno in 3rd gear...

or does it not work like that? eh whatever tho.

[ATISTANG]

The goal is to be as close as possible to your 1:1 even if it is less than that