Building up a JDM H22

[AccordDriver92]

I plan on getting JDM H22 to swap in my 92 Accord. But before I swap the motor in my car, I would like to build it up ready for a turbo. Even though I am still saving up for the engine. Im trying to get the parts before for I get the engine. So I had a couple questions. I was wondering if anyone knew some good brands to get for this list of parts.

Cam Gears
Pistons & Rods
Headers
Pulleys
Intake Manifold
Cams
Throttle Body

Now bare with me here, this will be my first engine that im going to build.

[civperc]

hey fellow VA resident. You're gonna have one badass Accord if you turbo an H series in it :

As far as the engine buildup goes, I'd recommend JE pistons and Crower rods. You won't need a header (for NA and supercharging), but instead it will be an exhaust manifold (for turboing). A set of AEM cam gears might benefit you, but people use stocks a lot too.

[ScotBoost?]

If replacing pistons then you will have to resleeve the block, JDM H22as do not like boost so if going through with it then get decent rods,pistons, sleeves and good tuning don't woory about the cams they are fine if hunting for extra ponies later then mess around with gears then the shafts.. Sounds like a nice accord.

EDITED BY STAFF, do not advertise for other boards.

[civperc]

Originally posted by ScotBoost?
If replacing pistons then you will have to resleeve the block, JDM H22as do not like boost

I'm going to disagree with you on both.

[AccordDriver92]

Why do you disagree?

[BoostinAccord]

Originally posted by civperc
I'm going to disagree with you on both.

yeah why do you disagree?

i would love to see this answer

11:1 compression (or 12:1 whatever it is) and nickel plated cylinder walls. yeah they love turbo

[civic_HP]

AEM Cam Gears
AEM Pulleys
Eagle Rods
JE Pistons
JG Intake Manifold
Skunk2, TODA, JG Cams
JG Throttle Body
RC Injectors
AEM Fuel Rail
Higher Output Fuel Pump
3" High Flow Exhaust
Block Guard if safety is an issue.
leave the stock header til you turbo and everything here is reused with the turbo

[BoostinAccord]

Originally posted by civic_HP
AEM Cam Gears
AEM Pulleys
Eagle Rods
JE Pistons
JG Intake Manifold
Skunk2, TODA, JG Cams
JG Throttle Body
RC Injectors
AEM Fuel Rail
Higher Output Fuel Pump
3" High Flow Exhaust
Block Guard if safety is an issue.
leave the stock header til you turbo and everything here is reused with the turbo

i agree. but you left out sleeves and which size turbo. and i would upgrade the head before i did an intake manifold