Quote:
Originally posted by solid
anybody know where i can purchase a dump tube??
|
Simple all you need is a flange and some piping (check out
http://www.jcwhitney.com for the piping and flange)...connect the flange to the wastegate, position the tube in the desired direction, have have the pipe and flange welded together and you're good to go. If you plan on doing a closed loop system then just direct the dump tube into the DP (about 18" from the header flange at a 45 degree angle...ideal CL setup with minimal HP loss).
Oh and avoid exiting towards any plastic peices, A/C lines, wires, etc.
Linear Mode
