Fuel pump/injectors OR Fuel pump/FMU?

[Mr. CR-V]

I'm going to be running a setup at about 6 psi, and I was wondering if I'd be ok running just a better fuel pump and an fmu. I'd be using the stock 97 CR-V injectors (not sure what size they are), until I increase the boost more and then I'd get some bigger ones. If I'd be ok with just a fuel pump and an fmu at that low boost level, what calibration disk should I get? Thanks for the help.

Jason

[themi6group]

go with a 12.1 fpr on stock fuel settings.

[Mr. CR-V]

Just a 12:1 FMU then? No fuel pump?

Jason

[themi6group]

with stock boost only the fuel pump will do. once you boost more than that, you'll need a hi flow fuel pump. 255lph to be exact.