Turbo'd B16Aand engine swap...?

[Mr OBD]

Hello all, new to the forum here!

Right then, Bascailly I work for a VW Audi tuning group and we were looking in to other manufactures so we ended up with a Honda CRX Del Sol to play about with.

All in all it is a stock motor with performance fuel pump, injectors etc etc all the usual stuff and we have fitted a Mitsubishi Evo twin scroll turbo (out of the EVO9) which I do believe is good to 400bhp at the flywheel...

Now can you all tell me what sort of power I can get out of a stock B16A motor? I cant quite remember the year of the car....

Also, personal opion an all I really don't like the Del Sol, so I am looking to get a EK Civic to do the transplant. Is there anything I need to look out for when doing this? I will have both cars complete so there will be no problem getting parts from the donor car....

Thanks again!

Mike

[mike@synapse]

crx del sol? one thing to note the del sol requires a shift linkage from the del sol VTEC(came with a b16 stock) a regular integra or 99si one wont work.

weve made 400+whp on the stock motors but typically we push them to about 300whp for reliable daily drivers.

[Mr OBD]

The motor is already in the CRX Del Sol - I would like to put it in a EK3/4 Civic.

Here are a few piccys - it has been stood a while....






Mike

[mike@synapse]

ok the shift linkage from your del sol wont work so you will need one from a 99-00 si or any integra 94+

you need a rear motor mount from a 99-00 si, as well. and i think you also need a driver side motor mount bracket .