here is the rear lights on my 96 jdm itr which i tinted. i just cleaned the lense with dish wash liquid and water then let them dry. i gave it a light coat of black tail lamp tint then gave it another coat about 3 minutes after. i left them to dry, only took about 1 hr.
i got it here in ireland in my local motor store. im sure you can get it where you live. its just called tail light tint spray and it comes in other colours, blue, green, red etc. here is some black tint on ebay if you cant find any locally.
you can get that at almost any hobby store, its called r/c tint spray.
looks good..
just a side note though, its best to split the lights apart and apply the tint spray to the inside of the lens rather the outside so that it would not scrape or scratch off with time.
__________________
1st general of JDM/KDM/HKDM/USDM Homeland Securities Lazyass
i got it here in ireland in my local motor store. im sure you can get it where you live. its just called tail light tint spray and it comes in other colours, blue, green, red etc. here is some black tint on ebay if you cant find any locally.
Mods: Intake/Exhaust, Ported/Polished head, Msd cap/coil, Si conversion, custom painted interior, window tint, locking hood pins, Red underbodys, all accesories removed from engine, etc.
My compliments on the look, I'm trying to get that spray but no one carries it in my area so I'm going to have to get it off of ebay.
__________________ Ima stick my dick in yo ear and fuck wacha heard.-KRS 1
Summit carries the spray you are looking for. I've seen some jobs come out horribly, and others exceptionally well. As long as you do the proper prep, it should be fine. The knowledge of rattle can use is a plus also!!! LOL!!
__________________
2000 Prelude SH
2nd Owner
Engine/Performance:
A'pexi ' SAFC2
Cold Air Intake
Flowmaster 40 Series Exhaust
System
3JL Audio 10W3's, Directed Audio Viper 400.2 Amp, Alpine CDA-9885 Head Unit
Sony Xplod 6x9's
Last edited by ShLude14 : 08-07-2007 at 04:38 PM.
Reason: Spelling
Mods: Came with: ebay intake, catback exhaust racing seats. I put on currently: 15" "Drags" Black with polished lip wrapped in khumo tires, Hyper Amber Corner Lamps, Amber city lights
can i see a pic with your lights and or brake lights on? looks like it realy dimms em out
Mods: Came with: ebay intake, catback exhaust racing seats. I put on currently: 15" "Drags" Black with polished lip wrapped in khumo tires, Hyper Amber Corner Lamps, Amber city lights
anyone got pics?
You did it nice im just not crazy about it in general looks like it hinders the light and i didnt realize that before but (don't take this the wrong way I don't mean it in a demeaning way) but it ricey when you do the reverse lights, you loose all function of it.
Linear Mode
