TW: 92 H22 Prelude CLEAN!!! ACCEPTING OFFERS (NEW ENGLAND AREA)!!!

[Mr.60trim]

DECIDED TO PART-OUT STARTING 4/5/08!!!!

H22A Prelude PART-OUT - SuperTech Head/Skunk2/Brembo/NRG & More...

(617) 301-3043

WILLING TO HEAR ALL OFFERS

Car Info/History

• 1992 Prelude SI (245K on chassis) - Purchased 5/29/04
• 1994 JDM H22A motor & tranny (Hmotorsonline.com) w/ approx 55K miles currently
• No Major dents or Rust. Will need a paintjob soon.
• Never been in an accident (Clean Title) - Can provide carfax report
• Interior is immaculate!!! (No rips, scratches, burns, etc AT ALL)

Motor

• 1994 H22A (Hmotorsonline.com) approx 55Kmi (...was not daily driven)
• (220psi each cyl - Compression test done on 11/18/07)
• Oil change every 3k miles. Mobil1 synthetic 10w 30 along w/ Mobil1 oil filters
• Supertech head - Racing valves Stainles steel valves, Titanium retainers - Done by Qu at (DSG)
• ***Dent Sport Garage - A reputable shop in MA***
• TRANSMISSION HAS NO GRINDS AT ALL!!!!
• Skunk2 70mm TB (Bored by DSG)
• Skunk2 Intake Manifold (Port-Matched 70mm by DSG)
• XTD stage 4 clutch (less than 50 miles usage - still needs to be broken in)
• Fidanza 8lbs flywheel
• Skunk2 adjustable camgears
• Hondata thermal intake manifold gasket
• Megan stainless steel header
• Vibrant flat black straight through muffler
• Walbro fuel pump 255LPH
• FAL slim fan 1250cfm
• Mishimoto half radiator
• Odyssey PC680 mjt slim battery
• AEM alternator pulley
• New OEM Crankshaft pulley
• New OEM headgasket
• New OEM Valve cover gasket
• New exhaust manifold gasket
• New alternator belt
• All seals & o-rings in valve cover replaced
• Custom painted valve cover w/ camgear moon-cuts
• Jegs valve cover breather catch can setup (-10AN fittings & stainless steel lines)
• New ECT sensor (not installed)
• New Vtec pressure switch sensor
• New TPS sensor (not installed)
• Megan oil pressure gauge
• NGK 9mm spark plug wires
• NGK v-power spark plugs (6-range)
  (I will include the stock Throttle body, and Intake manifold)

Suspension & Brakes

• Skunk2 adjustable coilovers
• KYB 4-way adjustable shocks
• Megan Upper front & rear strut bars
• Megan lower tie bar
• Brembo cross-drilled & slotted rotors
• PFI traction bar
• 17" ADR GT-Sport Rims (painted black - silver lugs w/ key lock)
• Fronts: Yokohama Parada Spec-2 tires
• Rears: Continental ContiSportContact tires
• (All tires 215/45/R17) *90% left on all 4 tires* (tirerack.com)

Cosmetics & Misc

• NRG Leather steering wheel, quick release, short hub & lock
• JDM black housing 1pc headlights (No scratches, peeling or blemishes)
• Custom tailights (clear signals)
• Accord-R Front lip
• OEM Accord rear lip
• Clifford Alarm
• 6000K HID kit (Not installed)
• MSD 6AL w/ 3step (Not installed) - Will include if buyer wants.

DON'T BE AFRAID TO PM ME OR CALL ME ANYTIME IF YOU HAVE ANY QUESTIONS OR CONCERNS. IF YOU WANT MORE PICS JUST ASK AND I WILL PROVIDE THEM AS SOON AS I CAN.

CELL# (617) 301-3043

Be a gentleman and BUMP if you look. Thanks

[Mr.60trim]

Will get more pics later in the week.

[Mr.60trim]

Bump

[quicksweepEX]

Bump for you. This guy builds some nasty shit,very nice lude,id hate to see you part out the car though

[Mr.60trim]

Originally Posted by quicksweepEX

Bump for you. This guy builds some nasty shit,very nice lude,id hate to see you part out the car though

Pms replied

Thanks homie! I hate to sell it but I have other priorities I have to handle right now.

[Mr.60trim]

Night bump

[Mr.60trim]

PMs replied

[Mr.60trim]

bump for more offers!

[Mr.60trim]

Bump...need this gone!

[Mr.60trim]

Bump...pms replied!

Edit to 1st post...please read!

[Mr.60trim]

Bump!

[Mr.60trim]

Up!

[Mr.60trim]

Bump Lowballers welcomed...