i need some help.

[Donald Maxwell]

I was wondering if anybody had a vtec wiring digram for the ecu (vtec)pins out of a 1994 honda delsol with the twin cam vtec. Just tryin to get vtev to engae. I've never messed with ecu wiring. Thanks.

[DUDMD_DELSOL]

Originally Posted by Donald Maxwell

I was wondering if anybody had a vtec wiring digram for the ecu (vtec)pins out of a 1994 honda delsol with the twin cam vtec. Just tryin to get vtev to engae. I've never messed with ecu wiring. Thanks.

Nice, another del sol with a b16! Mine originally was d16z6 so vtec was already setup. You have the S model?


There's two different ways to do this.
I got two pictures, one is for eg hatches (should be same wiring as del sol) and the other one for any obd1 honda ecu pinout. Pick a method which is better for you.

[Donald Maxwell]

i put the motor in my 93 hacthback the model i of the delsol i think is a plain delsol. Not the s or si the delsol vtec is a dohc motor. I got the motor runin and i drive it but vtecs not engagin. A speed shop wired it and ran the two vtec stuff into one pin in the ecu. I nevered wired vtec i had a 1.5 16v motor for a while. new at vtec.

[Donald Maxwell]

Thanks for the ecu lay out im gonna give it a try. The speed shop cut my one wire vtec solenoid. Dose the vtec wires have to go to the connectors or can it be routed straight to the ecu? Thanks for the help its appreciated.