Well, this is my first post here so just wanted to say I'm happy to be a member. Now I own a 2001 Accord EX Auto, recently I put the car in neutral and step on the gas to see where the Rev limiter was, and its at about 5~5.5k RPM, and if I just straight out floor it, and let go after bouncing the limiter, car is fine, but if I slowly creep up to the limiter, say I go to 3k RPM and slowly work my way up to the limiter and let go of the gas, the car dies. Then it starts up just fine. Btw it's a F23A3 ULEV engine. So thanks for the help guys!:w00tz Also the car has 50k miles on it.