Honda and Acura Car Forums banner
1 - 2 of 11 Posts

· Registered
2 Posts
Discussion Starter · #1 · (Edited)
Hey Everyone, I have a interesting issue with my 90 honda civic characterized by a pretty specific sign but after a few days of searching through the internet and a few forums, I haven't really come up with anything. I have a very slight idea but that's it.

It's a 90 Honda Civic EX Manual.

Basically, One day, I went down to my car and it wouldn't start. And no I didn't leave any lights on, battery checked out fine and that was it. So I was thinking starter but it was a weekend and my mechanic whose never screwed me over was closed so I was like well I'll try tomorrow on Sunday. On sunday, I went down and started my car up fine. Although it was very, very chuggy and stalled out the first time, it went the second time. No check engine light.

So I let it warm up, it was fine I drove it down and parked it on the side of the street for him to work on and we replaced the starter since it was really old, seemed like it was going and the car's at 155k and I asked him to adjust my clutch.

Well, for 5 days, it was fine till just the other day I ran down and like literally 2 hours after I drove it and I had to drive it again, it wouldn't start. It was cold outside, like the last time but that was it. So I called AAA at night, the guy towed it although he said it seems the clutch was disengaged.

Of course, the mechanic comes in the next morning starts the car up right fine and wheels it in. I'm like okay, this doesn't make any sense.

When it doesn't start, it makes a click as if I'm not pushing my clutch all the way down but me and the AAA guy were both throwing it to the floor.

The only other sign then that is, my clutch pedal seems a little weird. It like makes a crank sound when I push in and switch gears and then another crank sound when I release.

The only guess I have is maybe the pressure plate but how it could be so sporadic like that? I was wondering if I could get another opinion before I go about replacing the pressure plate/throw out bearing?

I also forgot to add that there is like a 3 second delay between the point of when I turn the key and the car begins to crank and start up.

1 - 2 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.