Honda and Acura Car Forums banner
1 - 2 of 2 Posts

· Registered
5,438 Posts
no, you do not need to resurface new rotors... and i dont know what would be cheaper, but it'll probly be the rotors urself... not to mention that if they're warped too bad the shop will need to replace them anyway

but if you go with new rotors you need to bed them in properly (starting and stopping to get the grooves in the pads to match the rotors) before you go driving off
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.