accord coilover on a ford? will this work???

775 Views 4 Replies 3 Participants Last post by Drag-On, Feb 26, 2002

jason94accord

Discussion Starter · Feb 25, 2002

ok well i got some cheap HP racing coilover sleeves on my accord now, ok. and i got a friend who has a 94 probe gt, and well he wants to drop his car, and im willing to sell him my coils if they will fit. so does anyone know if they will work, cause if they do im getting ground control...any help would be great

Save

1 - 5 of 5 Posts

V6CpeGirlie

· #2 · Feb 25, 2002

I really, really, really doubt it.

Save

jason94accord

Discussion Starter · #3 · Feb 25, 2002

come on now, thats not what i wanna hear...

Save

V6CpeGirlie

· #4 · Feb 25, 2002

jason94accord said:
come on now, thats not what i wanna hear...

I know, I'm sorry. But weight differences (and I'm not sure if anything else) is a major factor in determining the correct springs/coilovers. I mean, even from a V6 and an I4 Accord, the springs are different. And before when my bf had a turbo Eclipse, the springs that he got were for the non-turbo, and so his car was much heaver, causing it to be soooo much lower than it should have been. Now I'm not sure if the same goes for coilovers, but for springs I know that it probably wouldn't be interchangeable with a Probe.

Save

Drag-On

· #5 · Feb 26, 2002

You should take off a front and rear shock on his and test fit the sleeves and the spring. It might work and you might need to ghetto it on.

Save

1 - 5 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month