For now all Other Cars not listed as a main forum/sub forum will go under "Other" (here).
Acura CL and TL
How come we dont have forums for Acura CLs and TLs? Ive been seeing more of these cars being fixed up these days. I also wanna see what some other people are doin to their TLs and CLs in other areas. Guess this is the best place to post..
1 - 19 of 19 Posts
Acura Vigor
I have the old generation TL!
I have the old generation TL!
YEAH WTF???????
No CL/TL forum!!!!!!!!!
Come on peeps, we got a sweet ride!!!!!
Not even under "other"!!!!
No love for brutha!!!!!!!
No CL/TL forum!!!!!!!!!
Come on peeps, we got a sweet ride!!!!!
Not even under "other"!!!!
No love for brutha!!!!!!!
hmm
I dont see why MDX has a forum yet the TL/CLs dont!!
I dont see why MDX has a forum yet the TL/CLs dont!!
no joke, there are more posts in this thread then there are in that forum
Re: hmm
THANK YOU!!!!! My point exactly!!!! We have a car that ENTHUSIATS drive. The MDX is a family vehicle!!!! They don't read through forums!!! They don't heavily mod their cars!!!! WE DO!!!!!! DO I HEAR AN "AMEN BRUTHA"???????????
Vigorous said:I dont see why MDX has a forum yet the TL/CLs dont!!
THANK YOU!!!!! My point exactly!!!! We have a car that ENTHUSIATS drive. The MDX is a family vehicle!!!! They don't read through forums!!! They don't heavily mod their cars!!!! WE DO!!!!!! DO I HEAR AN "AMEN BRUTHA"???????????
The GODS were actaully listening!!!!!! Oh to be sooo blessed!!!! I feel so warm and tingly inside. Giddy like a school girl even!!!! THANKS TO THOSE WHO LISTENED!!!!!!!
so, now that there is a forum for 6 people, what the hell are we going to do.
hmmm...
Well...
Better then a Forum for 0-2 people!
Lets begin by talking about our cars...
I have an Acura Vigor with the JDM g25a. Same motor that is in the 2.5TL but it the Japanese Version with higher compression (10:1 vs.9.1:1).Basic Intake and Exhaust. I also have progress springs that lowered it 2.5 inches...with gunmetal factory wheels...
Well...
Better then a Forum for 0-2 people!
Lets begin by talking about our cars...
I have an Acura Vigor with the JDM g25a. Same motor that is in the 2.5TL but it the Japanese Version with higher compression (10:1 vs.9.1:1).Basic Intake and Exhaust. I also have progress springs that lowered it 2.5 inches...with gunmetal factory wheels...
Holeee Shit!
You guys are fugn hilarious!
Nice ride Aztec......what's the hp and torque on that bad boy?
Do they even manufacture aftermarket intakes or headers and stuff for that CL yet?
:spawn:
Out
You guys are fugn hilarious!
Nice ride Aztec......what's the hp and torque on that bad boy?
Do they even manufacture aftermarket intakes or headers and stuff for that CL yet?
:spawn:
Out
Re: Holeee Shit!
As far as aftermarket, there is some, but not a lot. The only header is by Comptech. It adds 30 HP to the wheel though!!!! I am saving my pennies for it!! ($1200 just for the header!!) AEM, Injen, Weapon R all make a CAI and Short Ram for the car. Comptech is coming out with one soon. Comptech, HKS, Kakimoto, and one or two others are making an axle back exhaust. I have the comptechs on the way!!!! The suspension is the same as the 98 - 00 Accord V6 coupe. So suspension is easy. I will be getting the neuspeed sways to compliment the springs soon!!! AEM and Weapon R are both making chips. The Weapon R one will be a piggy back. Not sure about the AEM.
Quarter mile times are low 15's stock to 14.2 with the header. It wont be long before someone gets into the 13's with no chip or NOS!!! Chip and NOS and you are looking at the low 12's high 11's!!!! OH YEAH!!!!! All that speed and heated seats too!!!
It is a BLAST to drive!!!!! One of the guys on the acural-cl.com board called it "The poor mans luxury sport coupe!!!"
Thanks racerpunkX!!!! The stock HP is 260 and torque is 232. That is at the crank. Most of the dyno's I have seen are about 200 at the wheel for HP, the torque number is escaping me right now!! I will dyno mine bone stock soon, hopefully this month!! I will post the results.racerpunkX said:You guys are fugn hilarious!
Nice ride Aztec......what's the hp and torque on that bad boy?
Do they even manufacture aftermarket intakes or headers and stuff for that CL yet?
:spawn:
Out
As far as aftermarket, there is some, but not a lot. The only header is by Comptech. It adds 30 HP to the wheel though!!!! I am saving my pennies for it!! ($1200 just for the header!!) AEM, Injen, Weapon R all make a CAI and Short Ram for the car. Comptech is coming out with one soon. Comptech, HKS, Kakimoto, and one or two others are making an axle back exhaust. I have the comptechs on the way!!!! The suspension is the same as the 98 - 00 Accord V6 coupe. So suspension is easy. I will be getting the neuspeed sways to compliment the springs soon!!! AEM and Weapon R are both making chips. The Weapon R one will be a piggy back. Not sure about the AEM.
Quarter mile times are low 15's stock to 14.2 with the header. It wont be long before someone gets into the 13's with no chip or NOS!!! Chip and NOS and you are looking at the low 12's high 11's!!!! OH YEAH!!!!! All that speed and heated seats too!!!
It is a BLAST to drive!!!!! One of the guys on the acural-cl.com board called it "The poor mans luxury sport coupe!!!"
dont forget about the comptech supercharger coming out, that would go nicely with your headers, and help get you to the 13's or possibly 12's
i think mostly cause people with cls/tls go to acura-cl.com....acura-tl.com......
:zombie: :zombie:
:zombie: :zombie:
Re: Re: hmm
AMEN BRUTHA
hmm my first post in v4.0
AztecRol said:
THANK YOU!!!!! My point exactly!!!! We have a car that ENTHUSIATS drive. The MDX is a family vehicle!!!! They don't read through forums!!! They don't heavily mod their cars!!!! WE DO!!!!!! DO I HEAR AN "AMEN BRUTHA"???????????
AMEN BRUTHA
hmm my first post in v4.0
1 - 19 of 19 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda and Acura Car Forums
A forum community dedicated to Honda and Acura owners and enthusiasts. Come join the discussion about performance, modifications, concepts, reviews, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
