Honda and Acura Car Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
okay i posted a thread earlier about dropping my 87 crx and it was answered. now my question is, i was reading this article on red pepper racing and found i can drop the front of my crx by taking out the torsion bar and shift it a tooth. can anyone explain that to me. thanks
 

·
Registered
Joined
·
417 Posts
skat said:
okay i posted a thread earlier about dropping my 87 crx and it was answered. now my question is, i was reading this article on red pepper racing and found i can drop the front of my crx by taking out the torsion bar and shift it a tooth. can anyone explain that to me. thanks
you don't take the torsion bars out - you just turn the bolts

 

·
Registered
Joined
·
8 Posts
Discussion Starter · #3 ·
yea, i already lowered the bolts but my question is that this article said
In the front, the front torsion bars can be adjusted lower about 1/2 inch by loosening the adjustment nut underneath the caron each side. now it continues to say to get the front really low, you will need to take the torsion bars out and reposition them 1 notch lower. the 1 notch lower is what i don't understand.
 
1 - 3 of 3 Posts
Top