Honda and Acura Car Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
141 Posts
Discussion Starter #1
Just replaced the t belt on my b16. I removed the starter and used a 2" X 10" long piece of angle iron to stop the fly wheel from turning. The angle iron extends out of the bellhousing far enough to reach the motor mount, using a small pry barto hold tension on the iron. robert
 

·
Registered
Joined
·
20,271 Posts
tortis said:
Just replaced the t belt on my b16. I removed the starter and used a 2" X 10" long piece of angle iron to stop the fly wheel from turning. The angle iron extends out of the bellhousing far enough to reach the motor mount, using a small pry barto hold tension on the iron. robert
whats this post regarding?? removing this bolt has many different ways. many times just require some thinking and kommon sense
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top