Honda and Acura Car Forums banner
1 - 2 of 9 Posts

· Registered
78 Posts

No its an easy test it comes with a deal that looks like a sparkplug on a wire you basicly pull your spark plug and slide it down your head and screw the sparkplug on a wire in the hole then turn the motor over a few time but first make sure you have a few sparkplug wires pull so that the motor doesn't start. So at the end of the wire is a pressure gauge. it will tell you what the pressure is then you release it and go tot he next one. if you have any that are below 70 then its rebuild time also if you have any that are more then 5 psi apart then you wanna rebuild the motor.
Hope this helps and if I missed something people feel free to pitch in.
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.