Honda and Acura Car Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
52 Posts
Discussion Starter · #1 ·
I plan on having my project setup as a touring/Autobahn type ride and also a daily driver. Currently I have planned to use a Crower Stage 2 VTEC Camshafts (63422A), but am now wondering if it is too aggressive for the type of driving that will be done. Should I step down to a Crower Stage 1 VTEC Camshaft (63421)? Also should I keep the Crane Cams Crane/Ferrea DOHC H22 Roller Cam Followers (194-0805) that I currently also planned to use? Thanks.
 

· Registered
Joined
·
12,727 Posts
I would use the crower stage 2 cams with the stock idle lobe.

I would use the stock springs and retainers as I would not raise the rev limit on my car.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top