Honda and Acura Car Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
hi all, I am French and I have a 1998 civic coupe iSR vtec EUDM ( EX USDM ) civic color RED.

This is the thread of my car with pics in a french EJ fans forum ;)

EJ Squad France :: Connexion







on this pic you can see much European car ( they are of true shit ) :D







the car with 6000k HID kit :)



the USDM tail light ( in europe we like USDM or JDM but not EUDM :hehe )



My setup:

D16y8 Sohc VTec
Engine is STOCK
ECU MAP OBD2 stock
Spoon intake air filter
decat
SRS G45 axle back
Eibach prokit -35
BSA 15" wheel
Mugen ABS front lip
HID 6000k dual beam kit
SI style tail light

And why I am registered on this forum, because I bought that:

















:clappy

but I have a problem, I believe that the kit is not complete ? I read the installation doc form jackson racing and it in english. I use the systran translators to convert the doc into french but it not correct.

in france most people drive whit turbo kit and very few people supercharger.
So i hope to find of the assistance on this forum :hug
 

·
Registered
Joined
·
5 Posts
Discussion Starter #2
i read that the kit come with a cranshaft pulley? is this necessary to change the stock cranshaft pulley because I do not have this pulley with my JR KIT

if somebody assembled a kit on a D16Y8, and that it has pics of the assembly that will be able really to help me!

sorry for my english i do my best :rolleyes
 

·
Registered
Joined
·
2,529 Posts
I think you need the crank pulley for one of two reasons: either the alignment is off with the stock pulley, or you need a 3 rib belt for the SC vs. a 4 rib stock belt.

Also, you should get that thing media blasted, it looks like it's covered in crap.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #4
thanks, if you look at the pic



the is the 4 ribs belt? and the JR pulley has also for 4 ribs belt
 

·
Premium Member
Joined
·
976 Posts
That exact kit has gone through about 4 owners in the last couple years. Im sure it is off of a D16a6. Which might give you problems when lining up your belts... Y8 manifold has a offset to it to clear the MC.
 
1 - 5 of 5 Posts
Top