Honda and Acura Car Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter #1
Can a D16Z6 or a JDM D15B=D16Z6 use the same wiring harness as my del sol S (D15B7)? I know that my mounts for my transmission and motor will work with it, I know that I need the P28 ECU, and I know that I would need a vtec solenoid. Is there anything else I'm missing or dont know about. All help is greatly appreciated as I am searching for a motor for my sol but am low on cash.
 

·
Registered
Joined
·
164 Posts
It will work for the most part, but there won't be any wiring for the vtec solenoid or oil pressure switch in you current wiring harness. Its not hard to run that wiring. The hard part is getting the wires to stay in the plug that goes to the ecu
 

·
Registered
Joined
·
84 Posts
Discussion Starter #3
So what exactly do I need? Its as simple as wiring up the solenoid and oil pressure switch? will all my existing wiring plugs work with the Z6 plugs?
 
1 - 3 of 3 Posts
Top