Honda and Acura Car Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
ok here is the problem i bought an 88 crx si with no engine and no engine harness, i got another si harness thinking they would be the same but it seems 88 is different from 89-91 right off the bat the clip near the resistor box on the 88 is alot smaller and alot different as the 89 and up have a big round clip , similar to the one on the passenger side....

is there a way to convert the 89- engine harness to work with my 88 ? i tried to find the wiring diagrams i need but i got nothing.....
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top