Honda and Acura Car Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
416 Posts
95integrars said:
if you have someone there they can watch the rotor to see if it's aligned correctly. it took me less than 30 seconds to get it. i don't know about breaking the rotor off with pliers but if u got no choice then i guess it's ok. the hard part about replacing the rotor is that fucking screw. it's such a bitch to get it loose. like a lot of u i also stripped the shit out of it. i had to use a drill to make new screw slots. then i was able to take it off with a flathead screw driver. i replaced it with a new screw.
thats what i do when i replace the rotor, just let someone watch it
 

·
Registered
Joined
·
416 Posts
turn it and take a look only takes like 5 or so tries
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top