Honda and Acura Car Forums banner

F20C Engine

8K views 6 replies 4 participants last post by  MQTGSR 
#1 ·
I wounder if any one can give me some help about the F20C engine. I need a rotating kit, to make a 2liter setup. Can there be used some rotating assemblies from some other honda engines? Is there anyone who know about some good stores for engineparts to F20C?

Hope for fast respond.

Thank's

Fredrik
Norway
 
#2 ·
you don't want a rotating kit, you mean a stoker kit?

If so, Brian Crower makes a stroker kit for the F20c
BRIAN CROWER 2.47L STROKER KIT: F20C/F22C (97mm STROKE BILLET CRANK/PRO-SERIES RODS/PISTONS) - BC0069 - DIRECT TUNING

And the engine is already a 2.0 or 2.2l depending weather you have an AP1 or AP2 s2000. This kit would make the motor roughly 2.4l. I'm not an expert on F20's but I would wager certain other F and K series parts MAY be interchangeable, but internals are fairly specific to the motor they came from. Deck heights, bore sizes, ect can all be different between engine models of the same family.
 
This post has been deleted
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top