Honda and Acura Car Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
hi people... on the 6th gen v6 accord coupe, which wire on the radio harness is the switched 12v source? thanks.... i'm installing an amp and new speakers to the stock head unit until i get a new head unit in january..... i need to know which wire to tap the remote turn-on lead into.....
 

· Registered
Joined
·
739 Posts
Use a DMM to find the sw. ign. For that matter, you can tap any sw. ign. for the remote. I would suggest a switch. Otherwise, your amp(s) will be running whenever the ignition is turned to Acc. 1 or Start 1 regardless of whether or not the HU is on. You may be more prone to experience alternator whine without some signal from the HU. Just a thought.
 

· Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
thanks.... i found out where the switches power wire is... now everything works , but i've got the speaker popping on startup and shutdown of the radio, speaker hiss, and engine whine..... need help ....
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top