Honda and Acura Car Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
66 Posts
Discussion Starter · #1 ·
ok i bought some after market halo projectors the other week. they worked awesome. the i was driving home one night and one side wasnt working at all. i opened the hood and found that the plug had been stuck inside the serpentine belt. the wores were a little frayed and the plug was pretty scuffed. so i rewired them, checked the bulbs and still nothing. the other side works perfect. my fuse is fine. i got no power to the plug at all at first, then a few days later i checked it when i was rewiring it and i got very little. i traced the wire back a little ways and im getting good power at the plug by the shock tower, its putting out 12v on one pin and almost 1 volt for another. this is with only my lights on nothing else. so i really need some help here. im not getting why one side is not working and the other is. thnx
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top