Honda and Acura Car Forums banner

How much to spray with 11.1 comp

951 Views 4 Replies 3 Participants Last post by  JDM_SOL
I´m using CTR pistons and skunk2 stage 1 cams, how much can I spray with this set up.

the kit I will be using is a zex but dont know if I sould go with a 65 or stay with a 55.

I have a FPR, STR fuel rail, B&M fuel pump and RC 270 injectors, I also have TI retainers and springs from SKUNK2.

thanks in advance
1 - 1 of 5 Posts
Because you're using OEM pistons, you're not going to want to go over a 75 shot. To be safe, I would go to a dyno and do a few 3rd gear pulls shooting 50, 60, and 70 shots. If you don't get detonation go for the 70 shot. If you don't want to go to a dyno keep it at a 50 shot.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top