Integra FS/WTB Thread
21 - 40 of 44 Posts
FS:misc integra parts...
buyer pays shipping and add 3% for paypal. offers are welcome
-DOOR PANELS W/ TWEETERS AND SWITCHES
-OEM FLOOR MATS
-DASH HOUSING
-CLIMATE CONTROL BEZEL/ AND CLIMATE CONTROL (can be parted or sold together)
-CIG/ASHTRAY
-LS CLUSTER (cluster itself is from a 00 itr, guages are from ls)-CUPHOLDER
-CF EBRAKE HANDLE
-REAR SEATS
-CHAMP WHITE AZECT/ACE SIDESKIRTS
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
buyer pays shipping and add 3% for paypal. offers are welcome
-DOOR PANELS W/ TWEETERS AND SWITCHES
-OEM FLOOR MATS
-DASH HOUSING
-CLIMATE CONTROL BEZEL/ AND CLIMATE CONTROL (can be parted or sold together)
-CIG/ASHTRAY
-LS CLUSTER (cluster itself is from a 00 itr, guages are from ls)-CUPHOLDER
-CF EBRAKE HANDLE
-REAR SEATS
-CHAMP WHITE AZECT/ACE SIDESKIRTS
Joined
·
615 Posts
read the sig
Joined
·
4,633 Posts
I'd like to get rid of my AEM Short Ram Intake w/ K&N Filter. I have a nice Comptech Icebox now, so I don't have the need for this AEM SRI. Specifically fits B18B Tegs, I'm sure it will fit many other applications.
This intake has never seen winter and looks almost new. The filter looks great too; has been properly maintained. Comes with a mounting bushing if you're installing it on an LS Teg.
I'd like to get $100 for it, but am open to offers.
(I'm thinking $59.99 is a great price for an AEM arm, and $39.99 is great for a pretty much new K&N filter).
![]()
This intake has never seen winter and looks almost new. The filter looks great too; has been properly maintained. Comes with a mounting bushing if you're installing it on an LS Teg.
I'd like to get $100 for it, but am open to offers.
(I'm thinking $59.99 is a great price for an AEM arm, and $39.99 is great for a pretty much new K&N filter).
Joined
·
59 Posts
fs 91 custom teg w/b20 swap
im located in urbana ohio, near springfield
custom 1991 Acura Integra, hatchback
engine swap, a B20B4 V-Tec, and it has roughly 33k miles on it
-electric yellow paint
-custom leather interior w/embroidered Acura emblem
-custom interior panels
-mild body kit
-17in maxxium rims w/brand new drilled and slotted rotors, not even 5 miles on them, just put them on
-carbon fiber hood w/hood latches
-M5 carbon fiber racing mirrors
-brand new halo headlights and carbon fiber tail lights
-DC race header
-oversized racing cams
-AEM air intake
-carbon fiber strut bars
-numerous carbon fiber exterior accents
-sunroof/moon roof
-tilt steering wheel
-power windows
-power locks
-custom alarm system
-V AFC A'PEXi V-Tec timing computer, also has tach, rpms, throttle, etc.
-MOMO steering wheel, race petals, and race knob
-Ractive shift boot and E-brake boot
-Dual XDMR7700 head unit
-Kenwood equalizer
-700x5 Kicker amp
-10inch L7 solo-baric subwoofer
-Autogag racing tack
-sports-comp oil and water A-pillar gauges
-Varad yellow under glow
-custom interior neons and strobe lights
-carbon fiber accents everywhere in the interior of the car
**I’m sure there are plenty of things I’ve left out or forgotten
this beauty has been pampered with tons of hand washes and waxes, it’s always clean with a gorgeous finish, the previous owner garaged it for 6 years before I got a hold of it and put easily a few thousand in it.
It has a few chips in it and other minor imperfections, nothing major, but other than that it’s in good shape.
it doesn’t have cruise control or fog lights, when was being built by original owner it wasn’t put back together correctly, and the ac and heat don’t work, only because they couldn’t fit it in along with the new engine because of its size
*tons of pure horse power and is quite quick and very fast
*great gas mileage, very great for the high pries
$10,000 or best offer
I have plenty of pictures, email [email protected] or call my cell (937)926-0700
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
im located in urbana ohio, near springfield
custom 1991 Acura Integra, hatchback
engine swap, a B20B4 V-Tec, and it has roughly 33k miles on it
-electric yellow paint
-custom leather interior w/embroidered Acura emblem
-custom interior panels
-mild body kit
-17in maxxium rims w/brand new drilled and slotted rotors, not even 5 miles on them, just put them on
-carbon fiber hood w/hood latches
-M5 carbon fiber racing mirrors
-brand new halo headlights and carbon fiber tail lights
-DC race header
-oversized racing cams
-AEM air intake
-carbon fiber strut bars
-numerous carbon fiber exterior accents
-sunroof/moon roof
-tilt steering wheel
-power windows
-power locks
-custom alarm system
-V AFC A'PEXi V-Tec timing computer, also has tach, rpms, throttle, etc.
-MOMO steering wheel, race petals, and race knob
-Ractive shift boot and E-brake boot
-Dual XDMR7700 head unit
-Kenwood equalizer
-700x5 Kicker amp
-10inch L7 solo-baric subwoofer
-Autogag racing tack
-sports-comp oil and water A-pillar gauges
-Varad yellow under glow
-custom interior neons and strobe lights
-carbon fiber accents everywhere in the interior of the car
**I’m sure there are plenty of things I’ve left out or forgotten
this beauty has been pampered with tons of hand washes and waxes, it’s always clean with a gorgeous finish, the previous owner garaged it for 6 years before I got a hold of it and put easily a few thousand in it.
It has a few chips in it and other minor imperfections, nothing major, but other than that it’s in good shape.
it doesn’t have cruise control or fog lights, when was being built by original owner it wasn’t put back together correctly, and the ac and heat don’t work, only because they couldn’t fit it in along with the new engine because of its size
*tons of pure horse power and is quite quick and very fast
*great gas mileage, very great for the high pries
$10,000 or best offer
I have plenty of pictures, email [email protected] or call my cell (937)926-0700
Joined
·
2 Posts
how much would u sell the b20 block for?90 g2 turbo teg 4dr
new interior
b18b1
turbonetics complete kit
17" enkei on brand new fuzion tires
new brakes and rotors
lowered 3 inches
alpine and memphis audio
also have b20 block and crank that i removed from car in good shape
![]()
Joined
·
1 Posts
i need 98 black leather seats.
Joined
·
102 Posts
Wtb a 98-01 Integra GSR. 2 door. Under 90k miles. Mostly stock (completely stock preferred). Must be either white, ssbp, silver, or black. No purple or green. Near Atlanta, Ga. Must be very well kept. Pm me if you have something i may be interested in.
b series parts
I was going throught the shed and got some parts i have no use for pm or email if interested email= [email protected]
here we go
ls trans and si trans well seel for right price if not ill keep them si trans is rebuilt has 500 miles on it.
ls head with intake manifold will sell seperate
ls injectors
b16a injectors
b16a crank
ls stock intake box with piping
b16a block
a/c compressors with some lines
power streering pumps
rear mount brackets
oil pan with pick up
starters
alternators
90 da interior pieces door panels center pieces etc..
make offers thanks trevor
I was going throught the shed and got some parts i have no use for pm or email if interested email= [email protected]
here we go
ls trans and si trans well seel for right price if not ill keep them si trans is rebuilt has 500 miles on it.
ls head with intake manifold will sell seperate
ls injectors
b16a injectors
b16a crank
ls stock intake box with piping
b16a block
a/c compressors with some lines
power streering pumps
rear mount brackets
oil pan with pick up
starters
alternators
90 da interior pieces door panels center pieces etc..
make offers thanks trevor
Joined
·
1 Posts
i would like to buy them i need to know if they fit a 90 teg
WTB: JDM Integra/Prelude Half Mast Antenna
I'm looking for an antenna that is compatible with my half mast switch. Anyone have an oem Half Mast Antenna out of a JDM Integra or Prelude for sale??
Email me at [email protected] if you have on available.
Let me know!
Thanks
I'm looking for an antenna that is compatible with my half mast switch. Anyone have an oem Half Mast Antenna out of a JDM Integra or Prelude for sale??
Email me at [email protected] if you have on available.
Let me know!
Thanks
I just picked up a 00 Integra GS Sedan and I'm looking to do a mild drop and get some 16" or 17" wheels. I'm in MD. Send me a PM or email [email protected].
Joined
·
490 Posts
96 integra ful part out let me know what you guys need.
http://www.superhonda.com/forum/f47/96-integra-ls-full-partout-342749/
http://www.superhonda.com/forum/f47/96-integra-ls-full-partout-342749/
Joined
·
39 Posts
i need a p75 obd1 ecu for my eg swap... please tell me wat u got... i also need tha engine harness... im tryin to put my b18b motor into an eg... willin to trade my obd2 p75 for an obd1 p75... or if not, im willin to buy it... tell me wat chu got...
Joined
·
4,086 Posts
BADGES!
i'm looking for two acura badges(hood, trunk lid). all i could find is the gold ones on the internet :idiots and since when do you need a year and model to look for a general emblem that adheres???? :banghead: a couple of years ago i remember you could buy the damn things from nopi, anyways i got all riled up again :ahh if you know where i could find some please point me in the right direction, thank you
i'm looking for two acura badges(hood, trunk lid). all i could find is the gold ones on the internet :idiots and since when do you need a year and model to look for a general emblem that adheres???? :banghead: a couple of years ago i remember you could buy the damn things from nopi, anyways i got all riled up again :ahh if you know where i could find some please point me in the right direction, thank you
21 - 40 of 44 Posts
