Honda and Acura Car Forums banner

itb ?

1K views 9 replies 9 participants last post by  98vtec 
#1 ·
i was lookin on ebay for some itb and i saw one from a honda bike? would that work the same as all the other itb's?
 
#2 ·
depends what motor you have and what size the itbs are ... if you are running a b sereis you need something around 40 to 50 mm for the itbs '

i belive a 600 bike is like 32mm .. but that would prolly work....
just have to modify you manifold)(cut it) and mount the itbs up..
im thinkin about trying it my self...,.
 
#10 ·
bonestockls said:
yeah, if you have to ask about itb's then maybe you shouldn't get itb's. too complicated. just got turbo and call it a night.
ITB's arent anything to just be bolted on...you have to have the right kind of engine management to run these without having lots of problems.

The reason people go with 600-1000cc bike ITB's and custom make there own mounting bracket is because its a lot cheaper than paying 1500 in my case for TWM ITB's

600cc is a good size for b series motors

most people with h22's run 1000cc ITB's
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top