Joined
·
11,248 Posts
most of the strut bars that I have seen are mounted with the shock mounting nuts. So if you jack the car up, and remove the nuts to install the bar, the shock assembly could fall out of place.
However if you are only talking about jacking the car up a little to prevent any preload on the bar (keeping the wheels on the ground and a load on the suspension), you would need to jack it up just a lil bit in the middle. However I really don't think that this is an issue for a car sitting on level ground.
However if you are only talking about jacking the car up a little to prevent any preload on the bar (keeping the wheels on the ground and a load on the suspension), you would need to jack it up just a lil bit in the middle. However I really don't think that this is an issue for a car sitting on level ground.
