Honda and Acura Car Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,062 Posts
yes you can fix it by going to the device manager, go to the IDE controllers and make sure you disable all the secondary drives that you don't need from the primary and secondary channel.

Also make sure your burner is on cable select (jumper settings) and on the correct channel ( probably slave on primary or secondary channel)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top