Honda and Acura Car Forums banner
1 - 1 of 12 Posts

· Registered
1,052 Posts
That's probably the VTEC oil switch your talking about. You need to have that wired as well if you want to be sure there is proper oil pressure before VTEC engages otherwise there may not be sufficient oil pressure and you could damage the valvetrain. Get a VTEC ECU like a PR3 it will work with your setup pretty well and you won't have to mess with the harness much then.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.